How To How to Root TWRP

How to install TWRP Recovery on Billion Capture Plus

How to install TWRP Recovery on Billion Capture Plus

So Do you want to install TWRP Recovery on Billion Capture Plus? if yes then you are at right place. Today we are here with the guide to install TWRP Recovery on Billion Capture Plus. Flipkart has launched its own Android Phone brand Billion Capture. We will show How to install TWRP Recovery on Billion Capture Plus.

How to Install TWRP Recovery on Billion Capture Plus

The Billion Capture Plus released in November 2017. Billion Capture Plus Comes with a 5.5-inch 2.5D curved glass screen. The Capture Plus is powered by Snapdragon 625 Coupled with a 3/4GB of RAM. Coming to the optics it has Dual 13MP at the back end. Coming to the front side there is an 8MP shooter for taking a selfie.The Billion Plus Packs with a 35000mAh Battery. So without wasting time let’s start the guide on How to Root Billion Capture plus without a computer.

Related: How to Root Billion Capture Plus without PC

Guide to Install TWRP recovery on Billion Capture Plus

So before you Start updating the smartphone there are some points and pre-requirements you have to follow, So make sure you follow all of them carefully.

  • This guide is only for Billion Capture Plus so don’t try this on any other device as it will brick your device.
  • Make sure there is more than 70% battery on your device.
  • Pc is required to Install TWRP recovery on Billion capture Plus.
  • Make sure You have unlocked the bootloader for your Device.

Easiest way to Install TWRP recovery on Billion Capture Plus

Step 1:- First of all, You have to Enable Developer options on Your phone.

Step 2:- To Enable Developer option tap on build number for 7 times.

Step 3:- Now you will see developer options in the settings.

Step 4:- Now Enable USB debugging and OEM Unlock.

Step 5:- Now Download TWRP Recovery for Billion Capture Plus.

Step 6:- Now connect your phone to your pc using a USB cable.

Step 7:- Now create a folder named as Fastboot.

Step 8:- Now paste TWRP img into a fastboot folder.

Step 9:- Now open Command prompt window in the fastboot folder.

Step 10:- Now you have to boot your Capture Plus in fastboot mode.

Step 11:- To boot in fastboot mode you have to Give the following command in the Command prompt windows.

Fastboot reboot bootloader

Step 12:- Now you have to give the following command to install TWRP Recovery.

Fastboot flash recovery recovery.img

Step 13:- Now after giving the above command, your device will reboot.

Step 14:- Now TWRP Recovery will be installed on your device.

So this was our guide on How to Install TWRP recovery on Billion Capture Plus, We hope this guide helped you and if you have any doubt feel free to write down in the comments section below.

Leave a Comment