How to Install TWRP Recovery on Redmi 6A

Install TWRP on Redmi 6A

So do you want to Install TWRP on Redmi 6A? if yes then you are at right place. Today we are here with the guide to Install TWRP recovery on Xiaomi Redmi 6A easily. Redmi 6a is the latest and all new new smartphone from Xiaomi in india. The Device comes with average specifications and a Budget friendly price.

Redmi 6A comes with a 5.45″ display with a resolution of 720X1440 pixels and a pixel density of 295 Ppi, Under the hood of the device there is Mediatek helio A22 quad core processor coupled with 3Gb ram and 32Gb internal memory. The smartphone comes with 13Mp primary camera whereas a 5Mp camera is placed at the front end to take selfies. The smartphone runs on android Miui 9 based on Android 8.1 oreo However if you want to update redmi 6a to Miui 10 you can follow our guide to Install MIUI 10 on Any Xiaomi Device. So without wasting much time lets start the Guide to Install TWRP recovery on Redmi 6A.

Install TWRP recovery on Xiaomi Redmi 6A

So there are many advantages of installing TWRP recovery on your android device and they are mentioned below:

Advantages after installing TWRP recovery on Redmi 6A

Disadvantages after Installing TWRP recovery on Redmi 6A

  • Warranty on your Device will get void after installing TWRP recovery
  • Make sure you follow each and every step carefully

Before you start the guide there are some pre-requirements and points you have to remember while installing TWRP recovery. So make sure you follow all of them carefully:

Things to Remember Before Installing TWRP Recovery

  • This Guide is only for Redmi 6A users so dont try this on any other device.
  • Make sure there is more then 65% battery on your Redmi 6A
  • Make Backup of all important files on your Device so that you can restore them back
  • Laptop of PC is required to Flash TWRP recovery on Redmi 6A

Flash TWRP recovery on Redmi 6A

  • First of All make sure you have completed all the things given in the Pre-requirements section
  • Now Download TWRP for Redmi 6A from Here
  • Now copy the files in the folder where you have installed ADB usually the ADB files are present in local Disk C > Android
  • Now After Going to the ADB folder you have to launch the command window
  •  Press and Hold shift button and Right mouse button together to Open Command window.
  • Now Command Window will be opened
  • Now connect your Redmi 6A to your Computer in the fastboot mode
  • To boot in Fastboot mode give the following command

adb reboot bootloader

  • Now Check if the pc has recognized your device or not
  • To check give the following Command

adb devices

  • Now you will Android in the Command window which means your device is successfully connected to Pc
  • Now you have to give following commands to Install TWRP recovery on Redmi 6A

Fastboot flash recovery.img

  • Now TWRP recovery installation process will start on your device
  • Now give the following command again to reboot your device

fastboot reboot

  • That’s all !!! You have successfully Installed TWRP recovery on Redmi 6A

So this is How you can Install TWRP recovery on Redmi 6A easily, We hope you were able to Flash TWRP recovery on your device successfully. Incase if you have any doubt feel free to write down in the comments section below.

Leave a Comment