How To Samsung

How to Install Stock Firmware On Samsung Devices Using Odin Tool

Install Stock Firmware on Any Samsung Device using Odin flash tool

Do you want to Install stock Firmware On Samsung Devices Using Odin Tool? if yes then you are at right place. Odin tool comes handy when the ROM or new official update is faulty. And you want to Fix it.

Some of you don’t Know about Odin Tool. well, I will tell you about it. Odin Tool is a Windows based Flashing tool For Samsung Devices. Odin Tool is used to Flash ROMs, Kernels, Stock Firmware and much more. Odin Tool only Supports .tar.md5 or .tar Format file.  Don’t Worry all Samsung Stock Firmware are available in this Formal file. Odin tool helps you to Recover your Samsung Android Phone from Bricked.

So in this Guide, We will tell you step by step Guide on How to Install Stock Firmware On Samsung Devices Using Odin Tool. So without any further ado, Let’s start the guide on How to Install Stock ROM on Samsung Devices using Odin Tool. But before we starting the process there are some points and pre-requirements you have to follow make sure you follow all of them carefully.

Also Read:- How to Install Official Android 7.0 Nougat on Samsung Galaxy A3

Pre-requirements

  • This method is only for Samsung Galaxy Android Based Phone.
  • Make sure there is more than 75% battery in Your Smartphone.
  • You need PC for The Process.
  • RootUpdate is not Responsible for any damage to your Device.

Download 

Firmware For Samsung Galaxy Device:- Samsung-Updates

Odin Tool:- Download 

Enable USB debugging And OEM Unlocking

Step 1. Enable OEM unlocking and USB debugging. to do this, Go to Setting –> About Phone–> Software info and tap 7 times on Build Number to enable Developer option.

Step 2. Go back and you will see Developer Option Tap on it and Enable OEM unlocking and USB Debugging.

Install Stock Firmware On Samsung Devices Using Odin Tool

Steps to Install Stock Firmware On Samsung Devices Using Odin Tool

Step 1. First of all Read the Pre-Requirements.

Step 2. Download and Install Odin Tool on PC / Laptop Whatever You have. and Make sure ADB Drivers are Installed on Your Computer.

Step 3. Boot Your Samsung Galaxy Device into Download Mode. To Do this Turn off your Phone completely, Then Press Volume Down + Home Button + Power Button.

Step 4. Now open Odin Tool with elevated privileges.. to do this, right click on Odin tool and select run as administrator.

Step 5. Now connect your Android Phone to PC Via USB cable.

Step 6. In Odin Tool You will see Added!! when your device is detected.

Step 7. Now click on AP option and choose the Official Android Nougat File.

Step 8. Now click on the Options tap and uncheck Auto Reboot option.

Step 9. To start the process You have to click on Start Button in Odin Tool.

Step 10. when installation process done. you will see PASS with Green Tab in Odin Tool.

Step 11. Disconnect you Android Phone from PC. and Reboot it.

Also read: List of Samsung Devices updating to android 8.0 Oreo

That’s all!!! Now you have successfully Installed Stock Firmware on Samsung Device using Odin Tool.

i Hope you liked our Guide on How to Install Stock Firmware On Samsung Devices Using Odin Tool. If you have any doubt feel free to leave a comment down below in comment section.

Leave a Comment