How to Install TWRP Recovery On Samsung Galaxy C9 Pro

How to Install TWRP Recovery on Samsung Galaxy C9 Pro

So Do you want to Install TWRP Recovery on Samsung Galaxy C9 Pro? If yes then you are at right place. Today we are here with a Guide on How to Install TWRP Recovery on Samsung Galaxy C9 Pro. 


Samsung Galaxy C9 Pro is Good Smartphone From Samsung. Galaxy C9 Pro has Super AMOLED 6.0-inch Display with Corning Gorilla Glass protection. The Samsung Galaxy C9 Pro Comes with a 16MP Camera on Rear and 16MP on Front for Selfie. The C9 Pro is running on Android Marshmallow. It has 4000mAh Battery.

So in this guide, we will tell you How to Install TWRP Recovery Samsung Galaxy C9 Pro.  but before we starting the process there are some points and Pre-requirements you have to follow make sure you follow all of them carefully.

Also Read:- How to Root Samsung Galaxy C9 Pro


  • This method is only for Samsung Galaxy C9 Pro.
  • Make Sure there is more than 75% battery in your Android Device.
  • You need PC for Install TWRP Recovery.
  • RootUpdate is Not Responsible for any damage to your smartphone.


TWRP Recovery:-Download

ADB Driver:-Download

Odin Tool:- Download

Enable OEM Unlocking and USB Debugging

Enable OEM unlocking and USB debugging. to do this, Go to Setting –> About Phone–> Software info and tap 7 times on Build Number to enable Developer option. Go back and you will see Developer Option Tap on it and Enable OEM unlocking and USB Debugging.

How to Install TWRP Recovery Samsung Galaxy C9 Pro

Step 1. Download the TWRP Recovery.tar from the Download Section.

Step 2. Download and Install Odin Tool on PC / Laptop Whatever You have. and Make sure ADB Drivers are Installed on Your Computer.

Step 3. Boot Your Samsung Phone into Download Mode. Turn off your Phone completely, Then Press Volume Down + Home Button + Power Button. 

Step 4. Now open Odin Tool with elevated privileges.. to do this, right click on Odin tool and select run as administrator.

Step 5. Now connect your Samsung Galaxy C9 Pro to PC Via USB cable.

Step 6. In Odin Tool You will see Added!! when your device is detected.

Step 7. Now click on AP option and choose the TWRP Recovery.tar.


Step 8. To start the process You have to click on Start Button in Odin Tool.

Step 9. So When the installation process done. you will see PASS with Green Tab in Odin Tool.

Step 10.Disconnect you Android Phone from the desktop. and Reboot it.

That’s all!!! Now you have successfully Installed TWRP Recovery on Samsung C9 Pro.

i Hope you liked our Guide on How to Install TWRP Recovery on Samsung Galaxy C9 Pro. If you have any doubt feel free to leave comment down below in comment section.

Leave a Comment