root Samsung One UI 5.0 using the Magisk Patched AP: Are you looking for a way to root your Samsung One UI 5.0 device? If so, you’re in luck! In this blog post, we will show you how to root Samsung One UI 5.0 using the Magisk Patched AP. This rooting method is relatively simple and only requires a few steps. Plus, it doesn’t require a computer or any special equipment. So if you’re ready to get started, read on for our step-by-step guide.
What is Magisk?
Magisk is a systemless root method for Android devices. This means that it can be used on any device running Android, without the need for a custom kernel or modification to the existing stock firmware. Magisk can be used for a variety of purposes, including hiding root from apps that check for root access, allowing access to system files without having to modify the /system partition, and much more.
In order to use Magisk, you will need to have a custom recovery installed on your device. The most popular custom recoveries are TWRP and RedWolf. Once you have a custom recovery installed, you can boot into it and flash the Magisk ZIP file. Once flashed, you will need to reboot your device and then open the Magisk Manager app. From here, you can manage all of the various features that Magisk offers.
How to root Samsung One UI 5.0 using the Magisk Patched AP
Rooting your Samsung device running One UI 5.0 is a simple process that can be completed in just a few minutes. In order to root your device, you will need to use the Magisk Patched AP file, which can be downloaded from the Rootupdate’s website. Once you have downloaded the file, simply follow the instructions below to root your device.
Step 1: Unlock the bootloader
If you want to root your Samsung device running One UI 5.0, you’ll need to unlock the bootloader first. This can be done by following these steps:
1. Enable Developer Options on your device by going to Settings > About Phone and tapping on the Build Number seven times.
2. Next, go to Settings > Developer Options and enable OEM Unlocking.
3. Now reboot your device into Download Mode by holding down the Volume Down, Bixby, and Power buttons simultaneously.
4. Once in Download Mode, connect your device to a computer using a USB cable and open up Odin3 v3.13 or higher.
5. In Odin3, click on the AP button and select the Magisk Patched AP file that you downloaded earlier.
6. Make sure that only the Auto Reboot and F Reset Time options are checked before clicking on Start.
7. Once the process is complete, your device will reboot automatically and you will now have an unlocked bootloader!
Step 2: Download the One UI 5.0 stock firmware
If you want to root your Samsung One UI 5.0 device, you will need to download the Magisk Patched AP file. You can find this file on the Root update website.
Once you have downloaded the file, you will need to extract it. To do this, you will need to use a program like 7-Zip. Once you have extracted the file, you should see a folder called “Magisk-v19.3”.
Inside this folder, there is a file called “magisk_patched.tar”. This is the file that you will need to flash on your device in order to root it.
Step 3: Install Magisk and then check Ramdisk
Once you have downloaded the Magisk patched AP file, you will need to install it. To do this, simply transfer the file to your device and then open it up using a file manager. From here, tap on “Install” and then follow the prompts to complete the installation.
Once Magisk is installed, you will need to check the Ramdisk. To do this, go to the Magisk Manager app and tap on “Downloads”. From here, scroll down and tap on “Ramdisk Checksum Fix”. Once the download is complete, simply reboot your device and you should be all set!
Step 4: Patch the Samsung AP File
Now that you have the patched AP file, it’s time to flash it onto your device. This can be done using a variety of methods, but we’ll be using Odin for this guide.
1. Download and extract the Odin tool on your PC.
2. Boot your Samsung device into Download Mode:
– Power off your device.
– Press and hold the Volume Down + Bixby + Power buttons simultaneously.
– When the screen turns green, release all the buttons and press the Volume Up button to enter Download Mode.
3. Connect your device to the PC using a USB cable and launch Odin.
4. In Odin, click on the AP button and select the patched AP file that you downloaded earlier.
Do not touch any other options and make sure that Re-Partition is NOT ticked!
Step 5: Send Patched AP TAR to PC using ADB pull
Now that you have the patched AP tar file, it’s time to send it to your PC using ADB. To do this, connect your phone to your PC using a USB cable, then open a command prompt or terminal window and type the following:
adb pull /sdcard/patched_ap.tar
This will copy the patched AP tar file from your phone’s SD card to your PC. Once the transfer is complete, you can disconnect your phone from the PC.
Step 6: Boot your device to Download mode
Assuming you’ve already installed the latest version of Odin on your PC, boot your Samsung device into Download mode. To do so, first turn off your device. Once it’s turned off, press and hold the Volume Down + Bixby button (if your device doesn’t have a Bixby button, just hold the Volume Down button) and then press the Power button. Your device should now be in Download mode.
Now that your device is in Download mode, connect it to your PC using a USB cable. Once it’s connected, you should see a blue screen with a yellow ID:COM box and “Added!” message in Odin. If you don’t see this, try reconnecting your device or using a different USB port on your PC.
Once your device is successfully connected to Odin, click the AP button and select the Magisk ZIP file that you downloaded earlier. Then, make sure only the Auto Reboot option is checked before clicking the Start button.
Odin will now start flashing the ZIP file to your device. Once it’s done, your device will reboot and you should now be rooted!
Step 7: Install Odin
Before you can root your device, you’ll need to install Odin. Odin is a program that enables you to flash firmware onto Samsung devices.
You can download Odin for free from the Rootupdate’s website. Once you’ve downloaded it, extract the contents of the ZIP file and launch the program.
In order to use Odin, your device will need to be in Download Mode. To put your device into Download Mode, power it off and then press and hold the Volume Down + Home + Power buttons simultaneously. Once you see a warning screen, press the Volume Up button to continue.
Once your device is in Download Mode, connect it to your computer via USB and then click on the “PDA” or “AP” button in Odin. Next, select the Magisk ZIP file that you downloaded earlier. Finally, click on the “Start” button to begin flashing the firmware.
Once Odin has finished flashing the firmware, your device will reboot automatically and you’ll be able to enjoy your new root status!
Step 8: Flash the patched AP and then root Samsung One UI 5.0
If you’re running Samsung One UI 5.0, you can root your device using a patched AP file. To do this, you’ll first need to download the Magisk Manager app and the latest Magisk ZIP file.
Once you have those two files, open the Magisk Manager app and select “Install > Install > Select and Patch a File”. From there, navigate to the AP file you downloaded and select it.
After the file has been patched, go back to the main menu in Magisk Manager and select “Install > Install > Install Image”. Navigate to the Patched_AP file and select it. Once it’s been installed, reboot your device.
After your device has rebooted, open the Magisk Manager app again and go to “Settings > Update Settings”. Enable both options under “Update Settings” and then select “Check for Updates”. You should now see an option to update to the latest version of Magisk. Select that option and follow the prompts to install it.
Once Magisk has been updated, you’ll be able to root your Samsung One UI 5.0 device!
Step 9: Boot to Stock Recovery for enabling Magisk
Assuming you have followed all the steps until now, you should have a rooted phone with Magisk installed. The next thing to do is to boot into Stock Recovery and enable Magisk so that it survives a reboot.
To do this, power off your phone and then press and hold the Volume Up + Power button together until you see the Samsung logo. Once you see the logo, release the Power button but continue holding the Volume Up button till you see the Recovery mode screen.
In Recovery mode, use the Volume buttons to navigate to the ‘Reboot system now’ option and select it by pressing the Power button. This will reboot your phone into system with Magisk enabled.
Step 10: Complete the Magisk setup
Once you have finished Patching the AP file, it’s time to complete the Magisk setup. You will need to do the following:
1. Download the latest Magisk Manager app from here and install it on your device.
2. Open the Magisk Manager app and go to the ‘Install’ section.
3. Tap on ‘Select and Patch a File’ and select the AP file that you patched in Step 9.
4. Magisk Manager will now patch the file and create a new magisk_patched.apk file in your internal storage.
5. Copy this file to your PC and rename it to UPDATE-SuperSU-v2.46.zip
6. Now boot your device into TWRP recovery mode and flash the UPDATE-SuperSU-v2.46.zip file using the ‘Install’ option in TWRP recovery.
7. Once the installation is complete, reboot your device and you will be rooted with Magisk installed on your device!
Why you should root your phone
If you’re looking to get more out of your Samsung phone, then you should consider rooting it. Rooting gives you access to a whole host of hidden features and settings, as well as the ability to install custom ROMs and mods. It can be a bit daunting if you’ve never done it before, but we’ve got a handy guide to help you root your Samsung phone running One UI 5.0.
Rooting has plenty of benefits, but it also comes with some risks. voiding your warranty, for example. So, make sure you know what you’re doing before proceeding.
Once you’ve rooted your phone, you’ll be able to:
• Install custom ROMs and mods
• Tweak hidden settings and options
• Boost battery life
• Improve performance
• Unleash the true potential of your phone
What are the benefits of rooting your phone?
There are many benefits to rooting your phone, but some of the most popular reasons include:
-Having complete control over your phone and being able to customize it exactly how you want
-Gaining access to features and apps that are not available on non-rooted phones
-Improving battery life by being able to disable or delete apps that are draining your battery
-Increasing performance by being able to underclock or overclock your processor
-And much more!
How to unroot your phone
If you’ve decided that you want to unroot your Samsung phone, there are a few different ways to do it. The easiest way is to use a tool like SuperSU or Magisk Manager to remove the root files from your phone.
If you’re using SuperSU, simply open the app and tap on the “Uninstall” button. Confirm that you want to unroot your device, and SuperSU will take care of the rest.
If you’re using Magisk Manager, open the app and go to the “Settings” menu. Tap on “Full Uninstall”, and confirm that you want to unroot your device. Magisk Manager will then remove all of the root files from your phone.
Alternatively, you can also manually remove the root files from your phone by deleting them from your system partition. However, this is a more advanced method and should only be attempted if you’re confident in what you’re doing. If you delete the wrong file, it could cause serious problems with your phone.
Rooting your Samsung One UI 5.0 phone using the Magisk Patched AP is a simple and straightforward process. Just follow the instructions in this article and you’ll be able to root your phone in no time. Once you’ve rooted your phone, you’ll have access to a whole world of new possibilities and customization options. So what are you waiting for? Give it a try today!